Product Description
- Adjustable for elevation
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same
height-over-bore as standard A2 irons
- Protective wings shield the spring-locking A2 front sight post
Specifications:
Weight, w/ hardware: 1.2 oz.
Height above rail, stowed: ~0.51 in.
Length, stowed: 2.6 in.
Length, deployed: 1.5 in.
NOTE: Cannot be mounted to a railed gas block due to excess heat issues.
Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail.
Because of this the sight is also not compatible with MOE Hand Guards.
*Compatible with both real and airsoft rifles.
Installation and Usage Guide
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same
height-over-bore as standard A2 irons
- Protective wings shield the spring-locking A2 front sight post
Specifications:
Weight, w/ hardware: 1.2 oz.
Height above rail, stowed: ~0.51 in.
Length, stowed: 2.6 in.
Length, deployed: 1.5 in.
NOTE: Cannot be mounted to a railed gas block due to excess heat issues.
Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail.
Because of this the sight is also not compatible with MOE Hand Guards.
*Compatible with both real and airsoft rifles.
Installation and Usage Guide
Additional Information
| Manufacturer | MAGPUL |
|---|
